Directional Controlled Packaging Drop Weight Test Machine 1 To 3 Times / Minute

Directional Controlled Packaging Drop Test Machine Drops 1 To 3 Times / Minute

Directional (controlled) drop tester JD-3024S

product description:

● Mobile phone charger 2m directional drop tester is a special equipment for the mobile phone charger to perform the drop fatigue test in the high altitude range (0.3m ~ 2m).

● The structure is reasonable and unique, and it has sufficient applicability to different types of mobile phone chargers.

● The equipment is stable, low noise and maintenance free.

Testing purposes:

1. The durability of the outer casing.

2. Internal structure resistance (heavy) fall performance

Test process description:

1. Simulate the action of the user to drop the mobile phone from a high place to the ground level such as the ground when using it.

2. Manually put the mobile phone into the fixture, or suck on the suction cup → the clamp (suction cup) rises into position → the clamp (suction cup) and the mobile phone together become free to fall → when it falls to a certain height, the clamp (suction cup) releases the mobile phone → The free fall of the mobile phone fell on the marble board.

Function realization:

1. Cylinder realizes clamping; motor realizes lifting; button control.

2. Adjust the drop height by adjusting the height parameter of the digital display.

3. Manual operation mode

Technical Parameters

1. Number of stations: 1 / Taiwan

2. Operation mode: button operation, digital display setting related data.

3. Motion actuators: motor, SMC cylinder, vacuum chuck.

4. Drop height range: 0.3~2m (can be set)

5. Drop beat: 1 to 3 times / minute

6. Falling contact surface: marble, wood,

7. The maximum length of the fixture: 170mm, the maximum width of the fixture: 80mm

8. Voltage: 220V; Power: 950W; Air pressure: 0.4~0.6Mpa

9. Dimensions: 550mm * 650mm * 2650mm;

10. Weight: 100kg