Dongguan jie dong test equipment co.,LTD
Dongguan jie dong test equipment co.,LTD
Add to Cart
Test Power Supply 2100w Wire Bending Leakage Leakage Tracking Test Equipment
Leakage tracking test machine JD-3054
product description:
●The leakage tracking test is to apply a set voltage between the two electrodes on the surface of the solid insulating material, and drop the specified concentration of liquid at a certain height to evaluate the leakage resistance of the surface of the solid insulating material under electric field and contaminated medium. Trace ability.
●Applicable to lighting equipment, low-voltage electrical appliances, room electrical appliances, machine tool electrical appliances, for insulating materials, engineering plastics, electrical connectors.
Technical Parameters:
1. Studio volume: 0.1 m3 0.5m3 0.75 m3
2. Electrode: length ≥ 15mm; width 6mm ± 0.1; thickness 3mm ± 0.1
Material: Platinum, the edge of one end of the electrode is cut into a 300-angle bevel.
3, electrode distance: 4.0mm ± 0.1
4. The force applied by the electrode to the surface of the sample is: 1.0N ± 0.5
5, test voltage: 100V-600V can be set
6, test power: 2100W
7. When the short-circuit current is 1.0A, the drop value at 600V voltage is ≤50V.
8, the starting point judgment: 0.5A or more current lasts 2S
9, drip device:
①Solution drip interval 30s
② Droplet height: 30~40mm
③ Drop size: 20mm3~23mm3
④Test solution
10, with force measuring device:
(0.1 ± 0.002)% by mass of ammonium chloride (NH4CZ) was diluted with distilled water.