Dongguan jie dong test equipment co.,LTD
Dongguan jie dong test equipment co.,LTD
Add to Cart
Pvc Plate Thickness 5mm Salt Spray Test Box Jd-60a Touch Screen Salt Spray Machine
JD-60A Touch screen salt fog machine
I. Scope of application:
Saltwater spray testing machine is for various material surface treatment, including coatings, electroplating, organic and inorganic film, anode treatment, anti-rust oil and other anti-corrosion treatment after testing its corrosion resistance, so as to establish the quality of the product.
II.Model and Name: JD-60A Saltwater Spray Test Machine
Inner box size: 600 x 450 X 400mm(W * D * H)
Box size: 710 × 560 × 560mm(W * D * H)
III. Power supply:
220V Single Phase 2KW50HZ
IV. all materials
| 1. | The laboratory adopts imported PVC polyethylene plates with a thickness of 5mm and a durable temperature of 80 °C. |
| 2. | The laboratory seal cover adopts an imported European acrylic plate with a thickness of 4.5 mm. |
| 3. | The test drug supplement bottle adopts a hidden attached water level meter, which is easy to clean and not easy to break. |
| 4. | SUS # 304 stainless steel high pressure bucket is the best heat insulation effect for pressure air bucket |
| 5. | The laboratory basket frame adopts the plane division frame, which can adjust the angle arbitrarily. The four sides of the fog and the fog are exactly the same, and the number of test plates is placed. |
V.according to CNS.JIS. ASTM specifications, set temperature control
| 1. | Saltwater spray test | NSS(neutral), ACSS(acidic) AASS(acetate fog test) |
| 2. | Test room Pressure air drums |
35℃±1℃ 47℃±1℃ |
| 3. | Corrosion test | CASS(copper acetate) |
| 4. | Test room Pressure air drums |
50℃±1℃ 63℃±1℃ |
VI. Air supply system: 1 kg/ccm air pressure adjusted in two stages
For the first time, it is adjusted to 2kg/ccm imported air filter with drainage function;
The second adjustment is 1 kg/cm pressure.
VII. Spray method
| 1. | Using the principle of Bonute to absorb salt water and atomize it, the degree of atomization is uniform, and there is no phenomenon of blocking crystallization, which can ensure the standard of continuous testing. |
| 2. | Nozzles: Made of special glass nozzles, the size of the spray can be adjusted. |
| 3. | Spray volume adjustment type 1-2 mI(mI/80 cm/h)(16-hour average) |
| 4. | Spray method: continuous type |
| 5. | Using direct heating, the fast heating speed reduces the standby time. When the temperature reaches ON.OFF switching, the temperature is accurate and the power consumption is low. (Heating tube is made of high corrosion resistant heating system: titanium tube). |
VIII. Safety protection devices:
(A) When the water level is low, automatically cut off the power supply device.
(B) When the temperature is too high, automatically cut off the heater power supply device.
(C) A safety warning light device.
(D) Automatic warning lights at the end.
IX. Standard Configuration
| 1. | A shelf | 1 set(upper row 0 rod 6 lower row V frame 6) |
| 2. | 50Ml measuring tube | 1 branch |
| 3. | Temperature indicator table | Group 2 |
| 4. | Collection cup | 1 branch |
| 5. | Glass nozzles | 1(regular cleaning) |
| 6. | Saltwater filter | 1(regular cleaning) |
| 7. | Spray Tower | 1 set |
| 8. | Fog removal system | Group 1 |
X. Random attachments
| 1. | Test drug sodium chloride(Nacl) 500 grams | 2 bottles. |
| 2. | Manual of Practice and Warranty Card | 1 item |
| 3. | 5 L plastic measuring cup | 1 branch |
11. Service Commitment
The whole machine will be guaranteed free of charge for 12 months, with the exception of man-made and force majeure factors.
The main interface is divided into:
running, suspending, stopping, running parameters, system parameters
Control key:
press(run key) to start work, press(pause key) to stop spraying but the temperature control is not controlled by this;；
Remove Fog Key:
Press this key to remove salt fog from the box during the test to facilitate the inspection of the product
Stop key:
The run time is cleared at the end of the test or the test, and the device starts from scratch(if this key is not pressed after the test, the test will always prompt the end of the test).
Run Parameter Key:
Press this key to enter the set working time, spray time, intermittent time;
A. Working hours: total working hours
B. Spray timing: If continuous spray, set this to 0 minutes
C. Thermothermal timing: if continuous spray, set this to 0 minutes.
D. Press the return key to the main interface.
(Equipment reference map, depending on the physical object)
