Dongguan jie dong test equipment co.,LTD
Dongguan jie dong test equipment co.,LTD
Add to Cart
Test Box Size 800mm*850mm*600mm 408l Constant Temperature And Humidity Test Chamber
product description:
The constant temperature and humidity test chamber is used to test various performance indexes of electronic products, materials, electricians and instruments under high and low temperature or humid heat environment. This series of constant temperature and humidity test chambers is suitable for the reliability test of various industrial products. It has the
characteristics of temperature control precision and wide control range. The performance index conforms to GB5170.2.3.5.6-95 "Basic parameters verification method for environmental test equipment of electrical and electronic products". Requirements for low temperature, high temperature, constant damp heat, alternating wet heat test equipment.
fulfill the standard:
GB-2423.1-89 (IEC68-2-1) Test A: Low temperature test method.
GB-2423.2-89 (IEC68-2-2) Test B: High temperature test method.
GJB360.8-87 (MIL-STD-202F) high temperature life test.
GBJ150.3 (MIL-STD-810D) high temperature test method.
GJB150.4 (MIL-STD-810D) low temperature test method.
Technical Parameters:
Inner box volume: 408L
Specification model: JD-8001-408
Inner box size: W800×H850×D600mm Outer box size: W1350×H1950×D1280mm
Insulation material: Hard Polurethane foam + glass wool
Temperature and humidity parameters:
1. Temperature range: -40 ° C ~ 150 ° C
2. Temperature fluctuation: ≤0.5°C
3. Temperature uniformity: ≤ ± 2 ° C.
4. Heating time: from normal temperature to 150 ° C for about 40 minutes (non-linear)
5. Cooling time: from normal temperature to -40 ° C for about 65 minutes (non-linear)
6. Humidity range: 20% ~ 95% R.H.
7. Humidity fluctuation: ±1% R.H
8. Humidity uniformity: ±2.0% R.H.
Box door configuration:
1. Single-piece door, left open, handle on the right; product observation window 34×26×4cm three-layer vacuum layer;
2. Embedded non-reaction plane handle; door hinge: SUS#304;
3. The test box has built-in 11W lighting;
4. 2 silicone foam strips;
5. Self-contained electric automatic defogging device.
Technical Parameters:
| MODEL | JD-8001-80 | JD-8001-150 | JD-8001-225 | JD-8001-408 | JD-8001-800 | JD-8001-1000 | |
| Capacity specification | 80L | 150L | 225L | 408L | 800L | 1000L | |
|
Internal dimensions W* H*D(mm) |
400*500* 400 | 500*600*500 | 500*750*600 | 800*850*600 | 1000*1000* 800 | 1000*1000* 1000 | |
|
External size W* H* D(mm) |
1050*1700* 970 | 1150*1750*1070 | 1150*1850*1180 | 1350*1950*1280 | 1500*2030*1280 | 1500*2030*1470 | |
| Power supply | 1 ф 220V | 3 ф 380V | |||||
| Temperature range | -40°C ~+150°C | ||||||
| Humidity range | 20%~98%RH | ||||||
| Uniformity | Temperature | ±2℃ | |||||
| Humidity | +3%RH / -2%RH. | ||||||
| Volatility | Temperature | ±0.5°C | |||||
| Humidity | ±2.0% R.H. | ||||||
| Heating rate | Average 3°C/min, non-linear no-load, can be customized according to requirements | ||||||
| Cooling rate | Average 1°C/min, non-linear no-load, can be customized according to requirements | ||||||
| Inner box material | SUS 304# mirror stainless steel (thickness 1mm) | ||||||
| Outer box material | Outer box SUS 304# brushed stainless steel or iron plate spray treatment (thickness 1mm) | ||||||
| Insulation material | High temperature resistant high density PU rigid foam + glass wool insulator material | ||||||
| Cooling System | Original French Taikang compressor, environmentally friendly refrigerant R404A and R23A, fin condenser with heat sink evaporator, evaporator: fin type multi-stage automatic load capacity adjustment | ||||||
| Controller system | Color Chinese and English touch controller or English button controller | ||||||
| protective device | No fuse switch, compressor overload protection switch, overheating, overcurrent protection, over temperature protection, fan overload protection, fuse, dry burn protector, water shortage alarm protection | ||||||
| Standard accessories | 1 viewing window (three layers of vacuum insulated glass), 1 ф50mm test hole (on the left), 4 movable working wheels, 1 humidifying bucket | ||||||
| Online software | RS232 or RS485 connection, with software CD and link data cable 1 set, optional USB interface | ||||||
Main configuration(Refrigeration system / Material name /Quantity):
1. Compressor Taikang (France) 1 set
2. Condenser Fin type with cooling fan (Donghua) 1 set
3. Evaporator Customized 1 set
4. Expansion valve Danfoss/Honeywell (Denmark) 2 sets
5. Solenoid valve Danfoss (Denmark) 2
6. Solenoid valve Saginomiya (Japan) 2
7. Pressure controller Saginomiya (Japan) 1
8. Oil separator ALCO (USA) 1
9. Filter ALCO (United States) 1
10. Refrigerant: R404A Honeywell (USA)
11. Miscellaneous pieces such as copper pipes Taishun (Taiwan) 1 item
12. Measurement and Control System: Material Name Quantity
13. Temperature and humidity control instrument: TEMI580 (Korea) color touch 1
14. Over temperature protection instrument; RKC (Taiwan) 1
15. Temperature sensor; Pt100 2
16. Humidity sensor Pt100 1
17. Contactor Taian (Taiwan) 2
18. Thermal protector Taian (Taiwan) 1
19. Solid state relay ANV (Taiwan) 3
20. Time delay relay ANV (Taiwan) 2
21. Intermediate relay Omron (Taiwan)
22. Heating rod 1 Kw (customized) 2
23. Humidification tube 1Kw (customized) 1 set
24. Switching power supply (leakage protection) Blue (Taiwan) 1 set
25. Terminal block NIM (Japan) 1 item
26. Transformer customization 1
27. R232 communication interface and software for monitoring and data recording (optional 1500.00) 1 set
28. Control switch panel custom 1 item
29. Sound and light alarm Taian (Taiwan) 1 set
30. Heater protection Taide (Taiwan) 1 set
31. Fluorescent lamp ballast OSRAM (Germany) 1 set